Professional mounting foams

Accessories and supplies

<h2><strong>Mounting Foam EPA EMP-750 (750 ml)</strong></h2><p>This is a mounting foam for filling and sealing gaps, cracks and joints and for heat and sound insulation. The can holds 750 ml and weighs 845 g. It expands on contact with air and cures into a strong, dense layer.</p><h3><strong>Application</strong></h3><p>Used when installing door and window frames, filling cracks and cavities in walls and roofs, and sealing where pipes and cables pass through. Intended for builders and home users.</p><p><br></p><p><strong><em>EPA EMP-750</em></strong><em> — a high-quality mounting foam for reliably filling and sealing gaps and cracks.</em></p>

EMP-750-1

EMP-750-3

EMP-750-2

Монтажная пена EPA (EMP-750)

Volume

Mounting foam EMP-750 (750ml)

<h2><strong>Mounting Foam EPA EPP-850 (875 ml)</strong></h2><p>This is a mounting foam for filling and sealing gaps, cracks and joints and for heat and sound insulation. The can holds 875 ml and weighs 1000 g. It expands on contact with air and cures into a strong, dense layer.</p><h3><strong>Application</strong></h3><p>Used when installing door and window frames, filling cracks and cavities in walls and roofs, and sealing where pipes and cables pass through. Intended for builders and home users.</p><p><br></p><p><strong><em>EPA EPP-850</em></strong><em> — a high-quality mounting foam for reliably filling and sealing gaps and cracks.</em></p>

EPP-850-1

EPP-850-2

EPP-850-3

Монтажная пена EPA (EPP-850)

1000

Mounting foam EPP-850 (875ml)

<h4><strong>Fast Adhesive Foam EPA EKP-950 (750 ml)</strong></h4><p>This is a one-component polyurethane adhesive foam for fast, strong bonding of various building materials. It is especially suited to fixing insulation boards (EPS, XPS), panels and lightweight blocks. Initial tack sets in within 60 seconds, which cuts installation time and material consumption. Can volume: 750 ml (1000 g).</p><h4><strong>Advantages</strong></h4><ul><li>Initial tack in 60 seconds — boards and blocks hold in place quickly</li><li>Strong adhesion — securely bonds a wide range of building materials</li><li>Made for insulation boards — suits EPS and XPS boards, panels and lightweight blocks</li><li>43 L foam yield — one can covers a large amount of work</li><li>Surface dry in 2 min 30 sec, full cure in 44 min (tested at 18.1 °C and 47% humidity) — work can continue without a long wait</li><li>Economical use — reduces installation time and material consumption</li></ul><h4><strong>Application</strong></h4><p>Used for covering walls with insulation boards, installing panels and laying walls from lightweight blocks. As a multi-purpose foam, it suits a wide range of construction and renovation work. Work in a well-ventilated area and wear protective gloves; store in a dry place at +5 °C to +30 °C. Intended for professional tradespeople and construction teams.</p><p><br></p><p><strong><em>EPA EKP-950</em></strong><em> — an adhesive foam for fast, strong fixing of insulation boards and lightweight blocks.</em></p>

EPCH-950

EPCH-950-2

EPCH-950-3

EPCH-950-1

EPCH-950-4

Пена быстросохнущая (EKP-950)

Foam yield

Initial tack time

Surface dry time

Full cure time

Storage temperature

+5…+30

Fast adhesive foam EKP-950 (750ml)

<h4><strong>Mounting Foam EPA EMP-300 (300ml)</strong></h4><p>This is a polyurethane-based mounting foam designed for filling and sealing gaps when installing windows, doors, and other construction structures. It expands and cures with ambient humidity and has strong adhesion, bonding firmly to various materials (brick, concrete, wood, metal). It provides heat and sound insulation, improving energy efficiency.</p><h3><strong>Advantages</strong></h3><ul><li>Polyurethane-based formula — expands quickly with ambient humidity, fully filling gaps</li><li>Strong adhesion — bonds firmly to various materials including brick, concrete, wood, and metal</li><li>Good thermal insulation — reduces heat loss in a room, helping save energy</li><li>Sound-insulating properties — reduces the penetration of outside noise into a room</li><li>Forms a sturdy, long-lasting structure once cured — holds its strength over time</li><li>Convenient spray nozzle — allows precise, economical application</li><li>300ml can — sufficient for small to medium-sized jobs</li></ul><h3><br></h3><h3><strong>Application</strong></h3><p>Used for installing window and door frames, filling gaps and cracks between walls and ceilings, and sealing pipe passage points. Widely used in construction and renovation work.</p><p><br></p><p><strong><em>EPA EMP-300</em></strong><em> — a high-quality mounting foam for reliably filling and sealing gaps and cracks.</em></p>

EMP-300

EMP-300 4

EMP-300 5

EMP-300 6

Монтажная пена EPA (EMP-300)

Mounting foam EMP-300 (300ml)

<h4><strong>Mounting Foam EPA EMP-600 (600ml)</strong></h4><p>This is a polyurethane-based mounting foam designed for filling and sealing gaps when installing windows, doors, and other construction structures. It expands and cures with ambient humidity and has strong adhesion, bonding firmly to various materials (brick, concrete, wood, metal). It provides heat and sound insulation, improving energy efficiency.</p><h4><strong>Advantages</strong></h4><ul><li>Polyurethane formula — expands quickly with ambient humidity, fully filling gaps</li><li>Strong adhesion — bonds firmly to various materials including brick, concrete, wood, and metal</li><li>Good thermal insulation — reduces heat loss in a room, helping save energy</li><li>Sound-insulating properties — reduces the penetration of outside noise into a room</li><li>Forms a sturdy, long-lasting structure once cured — holds its strength over time</li><li>Convenient spray nozzle — allows precise, economical application</li><li>600ml can — sufficient for larger jobs too, meaning fewer can changes</li></ul><h4><br></h4><h4><strong>Application</strong></h4><p>Used for installing window and door frames, filling gaps and cracks between walls and ceilings, and sealing pipe passage points. Widely used in construction and renovation work.</p><p><br></p><p><strong><em>EPA EMP-600</em></strong><em> — a high-quality mounting foam for reliably filling and sealing gaps and cracks.</em></p>

EMP-600

EMP-600-1

EMP-600-2

EMP-600-4

Монтажная пена EPA (EMP-600)

Mounting foam EMP-600 (600ml)

<h4><strong>PU Foam Cleaner EPA EPCH-500 (500 ml)</strong></h4><p>This is a professional cleaner for removing uncured polyurethane foam and adhesive. It is suitable for cleaning foam guns, valves and various surfaces. It acts fast, dries quickly and leaves no residue. Can volume: 500 ml (400 g).</p><h4><strong>Advantages</strong></h4><ul><li>Removes uncured foam instantly — the gun and surfaces are quickly cleaned up after work</li><li>Cleans guns and valves — connects directly to the foam gun</li><li>Cleans surfaces — removes stray foam and adhesive residue</li><li>No residue, fast drying — the cleaned surface is soon ready for work</li><li>Fast-acting formula — cleaning takes very little time</li></ul><h4><strong>Application</strong></h4><p>Used for cleaning the gun and valves after working with PU foam, and for removing uncured foam from window frames, walls and other surfaces. Before use, shake the can for 15 seconds, connect the gun to the valve, turn the can upside down and pull the trigger. Extremely flammable aerosol: keep away from heat and flames and store in a dry place below +27 °C. Intended for professional tradespeople and construction teams.</p><p><br></p><p><strong><em>EPA EPCH-500</em></strong><em> — a professional cleaner for quickly removing uncured foam from guns and surfaces.</em></p>

Professional mounting foams
More 1054 models in our production of power tools and equipment

Filter

Filter

Mounting foam EMP-750 (750ml)

Article: EMP-750

Mounting foam EPP-850 (875ml)

Article: EPP-850

Fast adhesive foam EKP-950 (750ml)

Article: EKP-950

Mounting foam EMP-300 (300ml)

Article: EMP-300

Mounting foam EMP-600 (600ml)

Article: EMP-600

PU foam cleaner EPCH-500 (500ml)

Article: EPCH-500

Professional mounting foamsMore 1054 models in our production of power tools and equipment

Filter

Filter

Mounting foam EMP-750 (750ml)

Article: EMP-750

Mounting foam EPP-850 (875ml)

Article: EPP-850

Fast adhesive foam EKP-950 (750ml)

Article: EKP-950

Mounting foam EMP-300 (300ml)

Article: EMP-300

Mounting foam EMP-600 (600ml)

Article: EMP-600

PU foam cleaner EPCH-500 (500ml)

Article: EPCH-500

Professional mounting foams
More 1054 models in our production of power tools and equipment