Panel radiators

Equipments

<h2><strong>Panel Radiator EPA ER-P300/1000 (Type 22, 300×1000 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×1000 mm and has a heat output of 995 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/1000</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

ER_P600_2000

Радиаторы EPA (ER-P300/1000)

Working pressure

8-10

Maximum pressure

Centre Distance

Warranty

Heat output

Panel Radiator ER-P300/1000

<h2><strong>Panel Radiator EPA ER-P300/1200 (Type 22, 300×1200 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×1200 mm and has a heat output of 1194 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/1200</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/1200)

1194

Panel Radiator ER-P300/1200

<h2><strong>Panel Radiator EPA ER-P300/1400 (Type 22, 300×1400 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×1400 mm and has a heat output of 1393 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/1400</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/1400)

1393

Panel Radiator ER-P300/1400

<h2><strong>Panel Radiator EPA ER-P300/1600 (Type 22, 300×1600 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×1600 mm and has a heat output of 1592 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/1600</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/1600)

1592

Panel RadiatorER-P300/1600

<h2><strong>Panel Radiator EPA ER-P300/1800 (Type 22, 300×1800 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×1800 mm and has a heat output of 1791 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/1800</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/1800)

1791

Panel Radiator ER-P300/1800

<h2><strong>Panel Radiator EPA ER-P300/2000 (Type 22, 300×2000 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×2000 mm and has a heat output of 1990 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/2000</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/2000)

1990

Panel Radiator ER-P300/2000

<h2><strong>Panel Radiator EPA ER-P300/400 (Type 22, 300×400 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×400 mm and has a heat output of 398 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/400</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/400)

Radiator ER-P300/400

<h2><strong>Panel Radiator EPA ER-P300/600 (Type 22, 300×600 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×600 mm and has a heat output of 597 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/600</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/600)

Panel Radiator ER-P300/600

<h2><strong>Panel Radiator EPA ER-P300/800 (Type 22, 300×800 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 300×800 mm and has a heat output of 796 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 249 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P300/800</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P300/800)

Panel Radiator ER-P300/800

<h2><strong>Panel Radiator EPA ER-P400/1000 (Type 22, 400×1000 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×1000 mm and has a heat output of 1222 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P400/1000</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P400/1000)

1222

Panel Radiator ER-P400/1000

<h2><strong>Panel Radiator EPA ER-P400/1200 (Type 22, 400×1200 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×1200 mm and has a heat output of 1467 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P400/1200</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P400/1200)

1467

Panel Radiator ER-P400/1200

<h2><strong>Panel Radiator EPA ER-P400/1400 (Type 22, 400×1400 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×1400 mm and has a heat output of 1711 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P400/1400</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P400/1400)

1711

Panel Radiator ER-P400/1400

<h2><strong>Panel Radiator EPA ER-P400/1600 (Type 22, 400×1600 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×1600 mm and has a heat output of 1955 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P400/1600</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P400/1600)

1955

RAdiator ER-P400/1600

<h2><strong>Panel Radiator EPA ER-P400/1800 (Type 22, 400×1800 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×1800 mm and has a heat output of 2200 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P400/1800</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Радиаторы EPA (ER-P400/1800)

2200

Panel Radiator ER-P400/1800

<h2><strong>Panel Radiator EPA ER-P400/2000 (Type 22, 400×2000 mm)</strong></h2><p>This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×2000 mm and has a heat output of 2444 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.</p><h3><strong>Advantages</strong></h3><ul><li>Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks</li><li>Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems</li><li>Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly</li><li>Long service life of more than 10 years</li></ul><h3><strong>Application</strong></h3><p>Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.</p><p><br></p><p><strong><em>EPA ER-P400/2000</em></strong><em> — a panel radiator with a two-stage protective finish for fast, even room heating.</em></p>

Panel radiators
More 1054 models in our production of power tools and equipment

Filter

Filter

Panel Radiator ER-P300/1000

Article: ER-P300/1000

Panel Radiator ER-P300/1200

Article: ER-P300/1200

Panel Radiator ER-P300/1400

Article: ER-P300/1400

Panel RadiatorER-P300/1600

Article: ER-P300/1600

Panel Radiator ER-P300/1800

Article: ER-P300/1800

Panel Radiator ER-P300/2000

Article: ER-P300/2000

Radiator ER-P300/400

Article: ER-P300/400

Panel Radiator ER-P300/600

Article: ER-P300/600

Panel Radiator ER-P300/800

Article: ER-P300/800

Panel Radiator ER-P400/1000

Article: ER-P400/1000

Panel Radiator ER-P400/1200

Article: ER-P400/1200

Panel Radiator ER-P400/1400

Article: ER-P400/1400

RAdiator ER-P400/1600

Article: ER-P400/1600

Panel Radiator ER-P400/1800

Article: ER-P400/1800

Panel Radiator ER-P400/2000

Article: ER-P400/2000

Panel radiatorsMore 1054 models in our production of power tools and equipment

Filter

Filter

Panel Radiator ER-P300/1000

Article: ER-P300/1000

Panel Radiator ER-P300/1200

Article: ER-P300/1200

Panel Radiator ER-P300/1400

Article: ER-P300/1400

Panel RadiatorER-P300/1600

Article: ER-P300/1600

Panel Radiator ER-P300/1800

Article: ER-P300/1800

Panel Radiator ER-P300/2000

Article: ER-P300/2000

Radiator ER-P300/400

Article: ER-P300/400

Panel Radiator ER-P300/600

Article: ER-P300/600

Panel Radiator ER-P300/800

Article: ER-P300/800

Panel Radiator ER-P400/1000

Article: ER-P400/1000

Panel Radiator ER-P400/1200

Article: ER-P400/1200

Panel Radiator ER-P400/1400

Article: ER-P400/1400

RAdiator ER-P400/1600

Article: ER-P400/1600

Panel Radiator ER-P400/1800

Article: ER-P400/1800

Panel Radiator ER-P400/2000

Article: ER-P400/2000

Panel radiators
More 1054 models in our production of power tools and equipment