RAdiator ER-P400/1600

Panel Radiator EPA ER-P400/1600 (Type 22, 400×1600 mm)

This is a Type 22 panel radiator for heating flats, offices and other buildings, with two heating panels and two rows of convector fins. It measures 400×1600 mm and has a heat output of 1955 W (at ΔT 65 °C: 95 °C flow, 75 °C return, 20 °C room). The centre distance is 349 mm and the working pressure is 8–10 bar. It is made of DC01 cold-rolled low-carbon steel.

Advantages

• Two-stage anti-corrosion finish: an electrophoretic primer followed by electrostatic powder coating — improves corrosion resistance, gives an even colour and stands up well to knocks
• Every radiator is factory pressure-tested at 13 bar — suitable for central and stand-alone heating systems
• Type 22: two panels and two convectors boost warm-air circulation and heat the room quickly and evenly
• Long service life of more than 10 years

Application

Installed in water heating systems in flats, offices, shops and other buildings. Works with both central and stand-alone (boiler) heating systems. Choose the radiator's output to suit the room's floor area.

Note on use

The radiator should be installed by a qualified plumber. Check the heating system pressure before installation and bleed the air from the radiator after filling the system. With hard water, fitting a mains filter will extend the radiator's life. Protect it from impacts during transport and storage, keep it in a dry, ventilated place and keep chemicals off the surface.

EPA ER-P400/1600 — a panel radiator with a two-stage protective finish for fast, even room heating.