Aluminum Radiator ER-350/85AL
Article: ER-350/85AL
| Material | Aluminium |
| Working pressure | 12-18 bar |
| Maximum pressure | 36 bar |
| Test Pressure | 20 bar |
| Section Depth | 85 mm |
| Mounting Height | 35 cm |
| Number of Sections | 10 pcs |
| Centre Distance | 350 mm |
| Heat Output per Section | 128 W |
| Warranty | 120 months |
Aluminium Radiator EPA ER-350/85AL (10 sections)
This is a sectional aluminium radiator for water heating systems. The set has 10 sections, each with a heat output of 128 W, so the 10 sections together give about 1280 W. The centre distance is 350 mm. Each section measures 432×80×85 mm and weighs 0.86 kg. The working pressure is 12–18 bar, the test pressure 20 bar and the maximum pressure 36 bar.
Advantages
- Aluminium body — light and a good heat conductor, so it warms up and heats the room quickly
- Sectional design — you can add or remove sections to suit the size of the room
- 350 mm centre distance — also suits low window sills
- Working pressure of 12–18 bar and maximum pressure of 36 bar — suitable for central and stand-alone heating systems
Application
Used in water heating systems in flats, offices and commercial buildings, and especially well suited to stand-alone (boiler) systems. Choose the number of sections to suit the room's floor area and the heat output you need.
Note on use
The radiator should be installed by a qualified plumber. Bleed the air from the radiator after filling the system. Do not leave the heating system without water for long; with hard water, fitting a mains filter is recommended.
EPA ER-350/85AL — a light aluminium radiator that gives off heat quickly and evenly.
Aluminium Radiator EPA ER-350/85AL (10 sections)
This is a sectional aluminium radiator for water heating systems. The set has 10 sections, each with a heat output of 128 W, so the 10 sections together give about 1280 W. The centre distance is 350 mm. Each section measures 432×80×85 mm and weighs 0.86 kg. The working pressure is 12–18 bar, the test pressure 20 bar and the maximum pressure 36 bar.
Advantages
- Aluminium body — light and a good heat conductor, so it warms up and heats the room quickly
- Sectional design — you can add or remove sections to suit the size of the room
- 350 mm centre distance — also suits low window sills
- Working pressure of 12–18 bar and maximum pressure of 36 bar — suitable for central and stand-alone heating systems
Application
Used in water heating systems in flats, offices and commercial buildings, and especially well suited to stand-alone (boiler) systems. Choose the number of sections to suit the room's floor area and the heat output you need.
Note on use
The radiator should be installed by a qualified plumber. Bleed the air from the radiator after filling the system. Do not leave the heating system without water for long; with hard water, fitting a mains filter is recommended.
EPA ER-350/85AL — a light aluminium radiator that gives off heat quickly and evenly.
Also Viewed with This Product
