Smart automatic water pump EVN-U300 (300W)

Smart automatic water pump EPA EVN-U300 (300 W)

This is a smart automatic pump designed to raise water pressure in a home and garden and hold it at a steady level. Its permanent-magnet synchronous motor runs at 3300 rpm and adjusts its speed to the water demand, saving electricity in the process. The digital control system lets you set the required water pressure, and the pump works to that setting. A suction depth of up to 8 m allows it to draw water from a well or tank on its own, while a head of up to 34 m delivers water to high outlets.

Advantages

• Permanent-magnet synchronous motor — fast, efficient and economical in operation, resistant to damp conditions
• Speed matched to water demand — avoids unnecessary power draw and lowers electricity costs
• Digital control panel — allows the required pressure to be set precisely and the readings to be monitored continuously
• Sine-wave noise reduction technology — the pump runs quietly and keeps the home peaceful
• Dry-run protection — the pump stops by itself when the line runs out of water and restarts by itself once supply returns
• Freeze protection function — if the water temperature inside the housing drops below the set point, the pump starts by itself and prevents the housing from cracking
• Leak protection — the pump shuts itself down when pressure falls because of a leak in the line
• Enamelled cast iron housing — does not affect the taste or quality of the water, resists rust and lasts for years
• Factory-fitted check valve at the inlet — stops water flowing back and removes the need to install a separate valve

Application

Used to raise and stabilise water pressure in household pipework in houses and apartments, and to maintain steady flow in garden and smallholding irrigation systems. Thanks to its suction capability it also serves for drawing water from wells and tanks; the 300 W model is intended for smaller household needs such as a shower and kitchen.

Note on use

Functions such as starting pressure, rotation direction, leak protection, dry-run delay, freeze protection and the heating limit are enabled and adjusted separately through the settings button on the control panel. Without configuration, the required functions will not activate. Fault codes are shown on the display, and the procedure for clearing them is given in the operating manual.

EPA EVN-U300 — a smart, reliable pump that maintains constant pressure in a home water system.