Welding machine MIG/MMA-130 (130A)

Welding Machine EPA MIG/MMA-130 (130 A)

This is an inverter welding machine with three modes: gasless MIG (flux-cored wire), MMA stick and TIG (Lift). It runs on a 160–240 V supply. Welding current is 30–130 A in MIG mode, 20–130 A in MMA and 15–130 A in TIG. Wire diameter is 0.8–1.0 mm and the open-circuit voltage is 60 V.

Advantages

• Three modes: gasless MIG, MMA and TIG — different welding jobs with one machine
• Gasless MIG — flux-cored wire, no gas cylinder needed
• 0.8–1.0 mm wire — a neat weld on thin metal
• Operates across 160–240 V — welds even on an unstable supply
• IP21S protection — shielded from large particles and vertically falling drops

Application

Used at home and in the yard for welding doors, gates, railings and thin metal items and for repairing car bodies and machinery. Intended for home users and welders.

Note on use

Choose the welding current by electrode diameter: 2.5 mm — 60–100 A, 3.2 mm — 80–140 A. Install the machine in a dry, ventilated place at least 30 cm from the wall and do not exceed the duty cycle.

EPA MIG/MMA-130 — a powerful, reliable machine for strong, high-quality welding of metal structures.