Automatic water pumps

Water pumps

<h2><strong>Automatic water pump EPA EVN-A250 (250 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 250 W motor runs at 2860 rpm and delivers a flow of 36 L/min and a head of up to 29 m. It runs stably on a 170–220 V supply, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Operation at low voltage (170–220 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li><li>Standard 25 mm connection diameter — quick installation onto existing pipework</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Also used at small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A250</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Насос водяной автоматический EPA (EVN-A250 250 Вт)

Mains voltage

170-220

Power

Frequency

Rotation speed

2860

Throughput capacity

Maximum Head

Suction depth

The diameter of the connection connector

Warranty

Automatic water pump EVN-A250 (250W)

<h2><strong>Automatic water pump EPA EVN-A370 (370 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 370 W motor runs at 2860 rpm and delivers a flow of 38 L/min and a head of up to 32 m. It runs stably on a 170–220 V supply, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Operation at low voltage (170–220 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li><li>Standard 25 mm connection diameter — quick installation onto existing pipework</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Also used at small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A370</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Насос водяной автоматический EPA (EVN-A370 370 Вт)

Automatic water pump EVN-A370 (370W)

<h2><strong>Smart automatic water pump EPA EVN-A/250U (250 W)</strong></h2><p>This is a new-generation smart automatic pump designed to raise water pressure and hold it at a steady level. Its key difference is that it has no pressure tank: a built-in electronic relay and smart board control the pressure themselves, so there is no longer any need to top up the air in a tank from time to time. The 250 W motor runs at 2850 rpm and delivers a flow of 33 L/min and a head of up to 25 m. Pressure is set digitally with buttons — no manual turning of a screw or nut is required.</p><h3><strong>Advantages</strong></h3><ul><li>Tankless design — removes the need to add air to a tank and monitor its pressure</li><li>Electronic relay and smart board — continuously monitor pressure and start and stop the pump by themselves</li><li>Button setting — the required pressure is set with the up and down buttons, with no mechanical adjustment</li><li>Dry-run protection — the pump stops by itself when the pipeline runs out of water, keeping the motor from burning out</li><li>Three-indicator panel — shows power, pump operation and low water at a glance</li><li>Low noise level (no more than 70 dB) — comfortable for hotels, offices and residential settings</li><li>Built-in check valve — stops water running back, with no separate valve required</li><li>Cast iron front housing, aluminium mid housing and brass impeller — strength, corrosion resistance and long service life</li><li>Compact size and standard 25 mm connection diameter — fits into tight spaces and connects quickly to existing pipework</li></ul><h3><strong>Application</strong></h3><p>Used in multi-storey buildings, hotels, offices and shops to raise and stabilise water pressure. Applied in household pipework in houses and apartments wherever pressure is insufficient, and in systems requiring water to be drawn from depths of up to 6 m.</p><h3><strong>Note on use</strong></h3><p>The required pressure is set with the up and down buttons on the control panel. When dry-run protection is triggered, the matching indicator lights up on the panel — in that case the water supply in the pipeline should be checked. A separate restart button on the panel is provided for starting the pump again.</p><p><br></p><p><strong><em>EPA EVN-A/250U</em></strong><em> — a smart automatic pump that works without a pressure tank and keeps water pressure steady.</em></p>

Насос водяной автоматический EPA (EVN-A/250U 250 Вт)

2850

Smart automatic water pump EVN-A/250U (250W)

<h2><strong>Automatic water pump EPA EVN-A550 (550 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 550 W motor runs at 2860 rpm and delivers a flow of 49 L/min and a head of up to 43 m. It runs stably on a 170–220 V supply, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>550 W motor — a flow of 49 L/min and a head of 43 m supply systems with several outlets</li><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Operation at low voltage (170–220 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Its higher output and head suit household systems with several outlets as well as small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A550</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Насос водяной автоматический EPA (EVN-A550 550 Вт)

Automatic water pump EVN-A550 (550W)

<h2><strong>Automatic water pump EPA EVN-A250-5 (250 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 250 W motor runs at 2900 rpm and delivers a flow of 37 L/min and a head of up to 30 m. A suction depth of up to 8 m allows it to draw water from a well or tank on its own.</p><h3><strong>Advantages</strong></h3><ul><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Head of up to 30 m — delivers water to multi-storey homes and higher outlets</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li><li>Standard 25 mm connection diameter — quick installation onto existing pipework</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Also used at small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A250-5 </em></strong><em>— a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

photo

Насос водяной автоматический EPA (EVN-A250-5 250 Вт)

Current

2900

Automatic water pump EVN-A250-5 (250W)

<h2><strong>Smart automatic water pump EPA EVN-A/350U (350 W)</strong></h2><p>This is a new-generation smart automatic pump designed to raise water pressure and hold it at a steady level. Its key difference is that it has no pressure tank: a built-in electronic relay and smart board control the pressure themselves, so there is no longer any need to top up the air in a tank from time to time. The 350 W motor runs at 2850 rpm and delivers a flow of 37 L/min and a head of up to 30 m. Pressure is set digitally with buttons — no manual turning of a screw or nut is required.</p><h3><strong>Advantages</strong></h3><ul><li>Tankless design — removes the need to add air to a tank and monitor its pressure</li><li>Electronic relay and smart board — continuously monitor pressure and start and stop the pump by themselves</li><li>Button setting — the required pressure is set with the up and down buttons, with no mechanical adjustment</li><li>Dry-run protection — the pump stops by itself when the pipeline runs out of water, keeping the motor from burning out</li><li>Three-indicator panel — shows power, pump operation and low water at a glance</li><li>Suction from up to 8.5 m — draws water from a well or tank on its own, with no additional tank required</li><li>Low noise level (no more than 70 dB) — comfortable for hotels, offices and residential settings</li><li>Built-in check valve — stops water running back, with no separate valve required</li><li>Cast iron front housing, aluminium mid housing and brass impeller — strength, corrosion resistance and long service life</li></ul><h3><strong>Application</strong></h3><p>Used in multi-storey buildings, hotels, offices and shops to raise and stabilise water pressure. Applied in household pipework in houses and apartments wherever pressure is insufficient, and in systems requiring water to be drawn from depths of up to 8.5 m.</p><h3><strong>Note on use</strong></h3><p>The required pressure is set with the up and down buttons on the control panel. When dry-run protection is triggered, the matching indicator lights up on the panel — in that case the water supply in the pipeline should be checked. A separate restart button on the panel is provided for starting the pump again.</p><p><br></p><p><strong><em>EPA EVN-A/350U</em></strong><em> — a smart automatic pump that works without a pressure tank and keeps water pressure steady.</em></p>

Насос водяной автоматический EPA (EVN-A/350U 350 Вт)

Speed

Smart automatic water pump EVN-A/350U (350W)

<h2><strong>Automatic water pump EPA EVN-A750 (750 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 750 W motor runs at 2860 rpm and delivers a flow of 51 L/min and a head of up to 50 m. It runs stably on a 170–220 V supply, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>750 W motor — a flow of 51 L/min and a head of 50 m supply systems with several outlets and greater lift height</li><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Operation at low voltage (170–220 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. With the highest output and head in the series, it suits household systems with several outlets, multi-storey homes and small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A750 </em></strong><em>— a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Насос водяной автоматический EPA (EVN-A750 750 Вт)

Automatic water pump EVN-A750 (750W)

<h2><strong>Smart automatic water pump EPA EVN-A/450U (450 W)</strong></h2><p>This is a new-generation smart automatic pump designed to raise water pressure and hold it at a steady level. Its key difference is that it has no pressure tank: a built-in electronic relay and smart board control the pressure themselves, so there is no longer any need to top up the air in a tank from time to time. The 450 W motor runs at 2850 rpm and delivers a flow of 37 L/min and a head of up to 35 m. Pressure is set digitally with buttons — no manual turning of a screw or nut is required.</p><h3><strong>Advantages</strong></h3><ul><li>Tankless design — removes the need to add air to a tank and monitor its pressure</li><li>Electronic relay and smart board — continuously monitor pressure and start and stop the pump by themselves</li><li>Button setting — the required pressure is set with the up and down buttons, with no mechanical adjustment</li><li>Dry-run protection — the pump stops by itself when the pipeline runs out of water, keeping the motor from burning out</li><li>Three-indicator panel — shows power, pump operation and low water at a glance</li><li>Suction from up to 8.5 m — draws water from a well or tank on its own, with no additional tank required</li><li>Low noise level (no more than 70 dB) — comfortable for hotels, offices and residential settings</li><li>Built-in check valve — stops water running back, with no separate valve required</li><li>Cast iron front housing, aluminium mid housing and brass impeller — strength, corrosion resistance and long service life</li></ul><h3><strong>Application</strong></h3><p>Used in multi-storey buildings, hotels, offices and shops to raise and stabilise water pressure. Applied in household pipework in houses and apartments wherever pressure is insufficient, and in systems requiring water to be drawn from depths of up to 8.5 m.</p><h3><strong>Note on use</strong></h3><p>The required pressure is set with the up and down buttons on the control panel. When dry-run protection is triggered, the matching indicator lights up on the panel — in that case the water supply in the pipeline should be checked. A separate restart button on the panel is provided for starting the pump again.</p><p><br></p><p><strong><em>EPA EVN-A/450U</em></strong><em> — a smart automatic pump that works without a pressure tank and keeps water pressure steady.</em></p>

Насос водяной автоматический EPA (EVN-A/450U 450 Вт)

Smart automatic water pump EVN-A/450U (450W)

<h2><strong>Automatic water pump EPA EVN-A370-5 (370 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 370 W motor runs at 2900 rpm and delivers a flow of 40 L/min and a head of up to 36 m. A suction depth of up to 8 m allows it to draw water from a well or tank on its own.</p><h3><strong>Advantages</strong></h3><ul><li>370 W motor — a flow of 40 L/min and a head of 36 m provide steady water delivery in household systems</li><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li><li>Standard 25 mm connection diameter — quick installation onto existing pipework</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Also used at small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A370-5 </em></strong><em>— a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

EVN-A370-5

Насос водяной автоматический EPA (EVN-A370-5 370 Вт)

Automatic water pump EVN-A370-5 (370W)

<h2><strong>Automatic water pump EPA EVN-A1100 (1100 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 1100 W motor runs at 2860 rpm and delivers a flow of 92 L/min and a head of up to 53 m. It runs stably on a 170–220 V supply, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>1100 W motor — a flow of 92 L/min and a head of 53 m serve systems with high water demand</li><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Operation at low voltage (170–220 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Enlarged 38 mm connection diameter — carries a high flow without restriction</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. With the highest output, flow and head in the series, it suits irrigation over large areas, multi-storey homes and small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A1100</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Насос водяной автоматический EPA (EVN-A1100 1100 Вт)

1100

Automatic water pump EVN-A1100 (1100W)

<h2><strong>Smart automatic water pump EPA EVN-A/650U (650 W)</strong></h2><p>This is a new-generation smart automatic pump designed to raise water pressure and hold it at a steady level. Its key difference is that it has no pressure tank: a built-in electronic relay and smart board control the pressure themselves, so there is no longer any need to top up the air in a tank from time to time. The 650 W motor runs at 2850 rpm and delivers a flow of 55 L/min and a head of up to 40 m. Pressure is set digitally with buttons — no manual turning of a screw or nut is required.</p><h3><strong>Advantages</strong></h3><ul><li>Tankless design — removes the need to add air to a tank and monitor its pressure</li><li>650 W motor — a flow of 55 L/min and a head of 40 m supply systems with several outlets</li><li>Electronic relay and smart board — continuously monitor pressure and start and stop the pump by themselves</li><li>Button setting — the required pressure is set with the up and down buttons, with no mechanical adjustment</li><li>Dry-run protection — the pump stops by itself when the pipeline runs out of water, keeping the motor from burning out</li><li>Three-indicator panel — shows power, pump operation and low water at a glance</li><li>Suction from up to 8.5 m — draws water from a well or tank on its own, with no additional tank required</li><li>Low noise level (no more than 70 dB) — comfortable for hotels, offices and residential settings</li><li>Cast iron front housing, aluminium mid housing and brass impeller — strength, corrosion resistance and long service life</li></ul><h3><strong>Application</strong></h3><p>Used in multi-storey buildings, hotels, offices and shops to raise and stabilise water pressure. Applied in household pipework in houses and apartments wherever pressure is insufficient, and in systems requiring water to be drawn from depths of up to 8.5 m; the 650 W model is intended for higher-demand systems with several outlets.</p><h3><strong>Note on use</strong></h3><p>The required pressure is set with the up and down buttons on the control panel. When dry-run protection is triggered, the matching indicator lights up on the panel — in that case the water supply in the pipeline should be checked. A separate restart button on the panel is provided for starting the pump again.</p><p><br></p><p><strong><em>EPA EVN-A/650U</em></strong><em> — a smart automatic pump that works without a pressure tank and keeps water pressure steady.</em></p>

Насос водяной автоматический EPA (EVN-A/650U 650 Вт)

Smart automatic water pump EVN-A/650U (650W)

<h2><strong>Automatic water pump EPA EVN-A550-5 (550 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 550 W motor runs at 2900 rpm and delivers a flow of 50 L/min and a head of up to 45 m. A suction depth of up to 8 m allows it to draw water from a well or tank on its own.</p><h3>Advantages</h3><ul><li>550 W motor — a flow of 50 L/min and a head of 45 m supply systems with several outlets</li><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing with enamel coating inside — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li><li>Standard 25 mm connection diameter — quick installation onto existing pipework</li></ul><h3>Application</h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Its higher output and head suit household systems with several outlets as well as small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3>Note on use</h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A550-5</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

EVN-A550-5

Насос водяной автоматический EPA (EVN-A550-5 550 Вт)

Automatic water pump EVN-A550-5 (550W)

<h2><strong>Smart automatic water pump EPA EVN-A/850U (850 W)</strong></h2><p>This is a new-generation smart automatic pump designed to raise water pressure and hold it at a steady level. Its key difference is that it has no pressure tank: a built-in electronic relay and smart board control the pressure themselves, so there is no longer any need to top up the air in a tank from time to time. The 850 W motor runs at 2850 rpm and delivers a flow of 60 L/min and a head of up to 45 m. Pressure is set digitally with buttons — no manual turning of a screw or nut is required.</p><h3><strong>Advantages</strong></h3><ul><li>Tankless design — removes the need to add air to a tank and monitor its pressure</li><li>850 W motor — a flow of 60 L/min and a head of 45 m serve the most demanding systems in the series</li><li>Electronic relay and smart board — continuously monitor pressure and start and stop the pump by themselves</li><li>Button setting — the required pressure is set with the up and down buttons, with no mechanical adjustment</li><li>Dry-run protection — the pump stops by itself when the pipeline runs out of water, keeping the motor from burning out</li><li>Three-indicator panel — shows power, pump operation and low water at a glance</li><li>Suction from up to 8.5 m — draws water from a well or tank on its own, with no additional tank required</li><li>Low noise level (no more than 70 dB) — comfortable for hotels, offices and residential settings</li><li>Cast iron front housing, aluminium mid housing and brass impeller — strength, corrosion resistance and long service life</li></ul><h3><strong>Application</strong></h3><p>Used in multi-storey buildings, hotels, offices and shops to raise and stabilise water pressure. Applied in household pipework in houses and apartments wherever pressure is insufficient, and in systems requiring water to be drawn from depths of up to 8.5 m; the 850 W model is intended for sites with the highest demand and many outlets.</p><h3><strong>Note on use</strong></h3><p>The required pressure is set with the up and down buttons on the control panel. When dry-run protection is triggered, the matching indicator lights up on the panel — in that case the water supply in the pipeline should be checked. A separate restart button on the panel is provided for starting the pump again.</p><p><br></p><p><strong><em>EPA EVN-A/850U</em></strong><em> — a smart automatic pump that works without a pressure tank and keeps water pressure steady.</em></p>

Насос водяной автоматический EPA (EVN-A/850U 850 Вт)

Smart automatic water pump EVN-A/850U (850W)

<h2><strong>Automatic water pump EPA EVN-A1100-2 (1100 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 1100 W motor runs at 2850 rpm and delivers a flow of 91 L/min and a head of up to 50 m. It runs stably across a wide 150–230 V supply range, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>1100 W motor — a flow of 91 L/min and a head of 50 m serve systems with high water demand</li><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Wide voltage range (150–230 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing enamelled inside and out — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Enlarged 40 mm connection diameter — carries a high flow without restriction</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Its high output and flow suit irrigation over large areas, multi-storey homes and small production sites; designed for clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A1100-2</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Насос водяной автоматический EPA (EVN-A1100-2 1100 Вт)

150-230

Motor warranty

Automatic water pump EVN-A1100-2 (1100W)

<h2><strong>Automatic water pump EPA EVN-A200-2 (200 W)</strong></h2><p>This is an automatic surface pump that draws water from a well, tank or low-pressure pipeline and delivers it where needed at steady pressure. It starts by itself when a tap is opened, holds pressure through its tank once water use ends, and stops by itself. The 200 W motor runs at 2850 rpm and delivers a flow of 33 L/min and a head of up to 25 m. It runs stably across a wide 150–230 V supply range, so water delivery continues even where mains voltage drops.</p><h3><strong>Advantages</strong></h3><ul><li>Suction from up to 8 m — draws water from a well or tank on its own, with no additional tank required</li><li>Wide voltage range (150–230 V) — keeps water supply running when the mains supply weakens</li><li>Pressure tank — maintains constant pressure in the system and prevents frequent pump cycling</li><li>Thermal relay — switches the pump off by itself when motor temperature rises, protecting it from burnout</li><li>Check valve — passes flow in one direction only and stops water running back once the pump shuts off</li><li>Cast iron housing enamelled inside and out — resists rust and lasts for years</li><li>Full copper winding and brass impeller — improve durability and move water evenly</li><li>Stainless steel armature shaft, bolts and fasteners — reliable operation even in damp conditions</li><li>Compact size and standard 25 mm connection diameter — fits into tight spaces and connects quickly to existing pipework</li></ul><h3><strong>Application</strong></h3><p>Used in houses and country properties, gardens and irrigation systems to supply water and stabilise low pressure in pipework. Also used at small production sites; the 200 W model is intended for smaller household needs such as a shower and kitchen, and works with clean water only — free of sand, clay and other solid particles.</p><h3><strong>Note on use</strong></h3><p>After installation the relay must be adjusted to the working water pressure, otherwise it may fail quickly. If the pipeline runs out of water, or in an emergency, the pump must be switched off immediately: dry running burns out the motor. Use with non-potable or waste water without a filter is not permitted.</p><p><br></p><p><strong><em>EPA EVN-A200-2</em></strong><em> — a reliable automatic pump that draws water from a well or pipeline and delivers it at steady pressure.</em></p>

Automatic water pumps
More 1054 models in our production of power tools and equipment

Filter

Filter

Automatic water pump EVN-A250 (250W)

Article: EVN-A250

Automatic water pump EVN-A370 (370W)

Article: EVN-A370

Smart automatic water pump EVN-A/250U (250W)

Article: EVN-A/250U

Automatic water pump EVN-A550 (550W)

Article: EVN-A550

Automatic water pump EVN-A250-5 (250W)

Article: EVN-A250-5

Smart automatic water pump EVN-A/350U (350W)

Article: EVN-A/350U

Automatic water pump EVN-A750 (750W)

Article: EVN-A750

Smart automatic water pump EVN-A/450U (450W)

Article: EVN-A/450U

Automatic water pump EVN-A370-5 (370W)

Article: EVN-A370-5

Automatic water pump EVN-A1100 (1100W)

Article: EVN-A1100

Smart automatic water pump EVN-A/650U (650W)

Article: EVN-A/650U

Automatic water pump EVN-A550-5 (550W)

Article: EVN-A550-5

Smart automatic water pump EVN-A/850U (850W)

Article: EVN-A/850U

Automatic water pump EVN-A1100-2 (1100W)

Article: EVN-A1100-2

Automatic water pump EVN-A200-2 (200W)

Article: EVN-A200-2

Automatic water pumpsMore 1054 models in our production of power tools and equipment

Filter

Filter

Automatic water pump EVN-A250 (250W)

Article: EVN-A250

Automatic water pump EVN-A370 (370W)

Article: EVN-A370

Smart automatic water pump EVN-A/250U (250W)

Article: EVN-A/250U

Automatic water pump EVN-A550 (550W)

Article: EVN-A550

Automatic water pump EVN-A250-5 (250W)

Article: EVN-A250-5

Smart automatic water pump EVN-A/350U (350W)

Article: EVN-A/350U

Automatic water pump EVN-A750 (750W)

Article: EVN-A750

Smart automatic water pump EVN-A/450U (450W)

Article: EVN-A/450U

Automatic water pump EVN-A370-5 (370W)

Article: EVN-A370-5

Automatic water pump EVN-A1100 (1100W)

Article: EVN-A1100

Smart automatic water pump EVN-A/650U (650W)

Article: EVN-A/650U

Automatic water pump EVN-A550-5 (550W)

Article: EVN-A550-5

Smart automatic water pump EVN-A/850U (850W)

Article: EVN-A/850U

Automatic water pump EVN-A1100-2 (1100W)

Article: EVN-A1100-2

Automatic water pump EVN-A200-2 (200W)

Article: EVN-A200-2

Automatic water pumps
More 1054 models in our production of power tools and equipment