Rotary hammer drill EEP-28P (1020W)

Rotary Hammer EPA EEP-28P (1020W)

This is a rotary hammer designed for drilling and demolition work in concrete, brick, and stone. Its 1020 W motor with 3.5 J impact energy breaks through even dense concrete with ease. Three speed and impact rate settings (up to 920 rpm and 3970 bpm) let you match the mode to each material. The SDS-Plus chuck allows bits and chisels to be swapped without a key, in a single motion.

Advantages

• 3.5 J impact energy — drills through dense concrete and stone quickly and forcefully
• 1020 W / 8 A motor — maintains speed without bogging down even under heavy load
• Three speed settings (520/770/920 rpm) and impact rates (2250/3320/3970 bpm) — allow tuning to the material and working mode
• AVC vibration control system — reduces the shock reaching the hand and eases extended work
• Rotation control clutch — stops the tool from twisting if the bit jams and protects the operator's wrist
• Vario-lock chisel positioning — locks the chiselling angle in a comfortable working position
• SDS-Plus chuck and drilling diameter up to 28 mm — enable fast accessory changes and holes for large anchors

Application

Used for drilling holes in concrete, brick, and stone walls, installing anchors and dowels, chasing channels, and demolishing tile and plaster. Widely applied in construction, installation, and repair work.

EPA EEP-28P — a powerful, reliable rotary hammer for drilling on the job site.