Rotary hammer drill EEP-32-3 (1500W)

Rotary Hammer EPA EEP-32-3 (1500 W)

This is a rotary hammer for drilling, boring and breaking concrete and other hard materials. It runs on a 220–240 V supply with 1500 W of power. Speed is 930 rpm, impact rate up to 4300 blows per minute and impact force 5.5 J. The SDS-Plus chuck drills up to 32 mm in concrete, 42 mm in wood and 13 mm in metal.

Advantages

• 5.5 J impact force — drills and breaks concrete quickly
• 3 working modes — drilling, hammer drilling and chiselling
• Safety clutch — stops rotation if the bit jams, protecting the gears from breaking and the user from injury
• SDS-Plus chuck — quick bit changes, with a release button for a jammed bit
• Aluminium piston, metal gears and sealed bearings — long service life
• Short-circuit and overheating protection

Application

Used for drilling concrete, brick, stone and wood, removing tiles and plaster, levelling high spots on concrete floors, knocking off excess brick and concrete corners when fitting windows, and general installation and demolition work. Intended for professional tradespeople and construction teams.

Note on use

The rotary hammer takes bits from 4 to 30 mm. With 4–12 mm bits, rest for 15 minutes after every 30 holes; with large bits, rest after no more than 5 holes. Do not press hard when using a large-diameter bit. Always wear protective equipment.

EPA EEP-32-3 — a powerful, versatile rotary hammer for drilling and breaking hard materials.