ER-350-85AL

Radiators

Equipments

<h2><strong>Aluminium Radiator EPA ER-350/85AL (10 sections)</strong></h2><p>This is a sectional aluminium radiator for water heating systems. The set has 10 sections, each with a heat output of 128 W, so the 10 sections together give about 1280 W. The centre distance is 350 mm. Each section measures 432×80×85 mm and weighs 0.86 kg. The working pressure is 12–18 bar, the test pressure 20 bar and the maximum pressure 36 bar.</p><h3><strong>Advantages</strong></h3><ul><li>Aluminium body — light and a good heat conductor, so it warms up and heats the room quickly</li><li>Sectional design — you can add or remove sections to suit the size of the room</li><li>350 mm centre distance — also suits low window sills</li><li>Working pressure of 12–18 bar and maximum pressure of 36 bar — suitable for central and stand-alone heating systems</li></ul><h3><strong>Application</strong></h3><p>Used in water heating systems in flats, offices and commercial buildings, and especially well suited to stand-alone (boiler) systems. Choose the number of sections to suit the room's floor area and the heat output you need.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Bleed the air from the radiator after filling the system. Do not leave the heating system without water for long; with hard water, fitting a mains filter is recommended.</p><p><br></p><p><strong><em>EPA ER-350/85AL</em></strong><em> — a light aluminium radiator that gives off heat quickly and evenly.</em></p>

Радиаторы EPA (ER-350/85AL)

Material

Aluminium

Working pressure

12-18

Maximum pressure

Test Pressure

Section Depth

Mounting Height

Number of Sections

Centre Distance

Heat Output per Section

Warranty

Aluminum Radiator ER-350/85AL

<h2><strong>Aluminium Radiator EPA ER-500/100AL (10 sections)</strong></h2><p>This is a sectional aluminium radiator for water heating systems. The set has 10 sections, each with a heat output of 150 W, so the 10 sections together give about 1500 W. The centre distance is 500 mm. The section depth is 100 mm. The working pressure is 12–18 bar, the test pressure 20 bar and the maximum pressure 36 bar.</p><h3><strong>Advantages</strong></h3><ul><li>Aluminium body — light and a good heat conductor, so it warms up and heats the room quickly</li><li>Sectional design — you can add or remove sections to suit the size of the room</li><li>500 mm centre distance — the most common standard size, so connection points match when replacing an old radiator</li><li>Working pressure of 12–18 bar and maximum pressure of 36 bar — suitable for central and stand-alone heating systems</li></ul><h3><strong>Application</strong></h3><p>Used in water heating systems in flats, offices and commercial buildings, and especially well suited to stand-alone (boiler) systems. Choose the number of sections to suit the room's floor area and the heat output you need.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Bleed the air from the radiator after filling the system. Do not leave the heating system without water for long; with hard water, fitting a mains filter is recommended.</p><p><br></p><p><strong><em>EPA ER-500/100AL</em></strong><em> — a light aluminium radiator that gives off heat quickly and evenly.</em></p>

ER-500-100BM va AL

Радиаторы EPA (ER-500/100AL)

Aluminum Radiator ER-500/100AL

<h2><strong>Bimetallic Radiator EPA ER-500/100BM (10 sections)</strong></h2><p>This is a sectional bimetallic radiator with steel inner water channels and an aluminium outer body for water heating systems. The set has 10 sections, each with a heat output of 158 W, so the 10 sections together give about 1580 W. The centre distance is 500 mm. Each section measures 558×80×100 mm and weighs 1.85 kg. The working pressure is 12–18 bar, the test pressure 20 bar and the maximum pressure 51 bar.</p><h3><strong>Advantages</strong></h3><ul><li>Bimetallic design — the steel core handles high pressure and water hammer, while the aluminium body gives off heat quickly</li><li>Sectional design — you can add or remove sections to suit the size of the room</li><li>500 mm centre distance — the most common standard size, so connection points match when replacing an old radiator</li><li>Working pressure of 12–18 bar and maximum pressure of 51 bar — suitable for central and stand-alone heating systems</li></ul><h3><strong>Application</strong></h3><p>Used in water heating systems in flats, offices and commercial buildings. Its high pressure rating makes it especially suitable for central heating in apartment blocks. Choose the number of sections to suit the room's floor area and the heat output you need.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Bleed the air from the radiator after filling the system. Do not leave the heating system without water for long; with hard water, fitting a mains filter is recommended.</p><p><br></p><p><strong><em>EPA ER-500/100BM</em></strong><em> — a bimetallic radiator that withstands high pressure and gives off heat evenly.</em></p>

Радиаторы EPA (ER-500/100BM)

Bimetallic

Bimetallic Radiator ER-500/100BM

<h2><strong>Bimetallic Radiator EPA ER-500/80BM (10 sections)</strong></h2><p>This is a sectional bimetallic radiator with steel inner water channels and an aluminium outer body for water heating systems. The set has 10 sections, each with a heat output of 113 W, so the 10 sections together give about 1130 W. The centre distance is 500 mm. The section depth is 80 mm. The working pressure is 12–18 bar, the test pressure 20 bar and the maximum pressure 51 bar.</p><h3><strong>Advantages</strong></h3><ul><li>Bimetallic design — the steel core handles high pressure and water hammer, while the aluminium body gives off heat quickly</li><li>Sectional design — you can add or remove sections to suit the size of the room</li><li>500 mm centre distance — the most common standard size, so connection points match when replacing an old radiator</li><li>Working pressure of 12–18 bar and maximum pressure of 51 bar — suitable for central and stand-alone heating systems</li></ul><h3><strong>Application</strong></h3><p>Used in water heating systems in flats, offices and commercial buildings. Its high pressure rating makes it especially suitable for central heating in apartment blocks. Choose the number of sections to suit the room's floor area and the heat output you need.</p><h3><strong>Note on use</strong></h3><p>The radiator should be installed by a qualified plumber. Bleed the air from the radiator after filling the system. Do not leave the heating system without water for long; with hard water, fitting a mains filter is recommended.</p><p><br></p><p><strong><em>EPA ER-500/80BM</em></strong><em> — a bimetallic radiator that withstands high pressure and gives off heat evenly.</em></p>

ER-500-80BM

Радиаторы EPA (ER-500/80BM)

Bimetal Radiator ER-500/80BM

Radiators
More 1054 models in our production of power tools and equipment

Filter

Filter

Aluminum Radiator ER-350/85AL

Article: ER-350/85AL

Aluminum Radiator ER-500/100AL

Article: ER-500/100AL

Bimetallic Radiator ER-500/100BM

Article: ER-500/100BM

Bimetal Radiator ER-500/80BM

Article: ER-500/80BM

RadiatorsMore 1054 models in our production of power tools and equipment

Filter

Filter

Aluminum Radiator ER-350/85AL

Article: ER-350/85AL

Aluminum Radiator ER-500/100AL

Article: ER-500/100AL

Bimetallic Radiator ER-500/100BM

Article: ER-500/100BM

Bimetal Radiator ER-500/80BM

Article: ER-500/80BM

Radiators
More 1054 models in our production of power tools and equipment