Deep water pump 4EGN10/17-3 (3kW)

Borehole Pump EPA 4EGN10/17-3 (3 kW)

This is a borehole pump designed to lift water from wells and other deep sources. It runs on a 380 V supply with 3 kW of power. The pump lifts water up to 104 m and delivers up to 230 litres per minute. The housing diameter is 4 inches.

Advantages

• 3 kW power — enough force to lift water steadily from depth
• Up to 104 m head and 230 l/min flow — uninterrupted water supply even from great depth
• Wide operating range — 104 m at 60 l/min, 23 m at 230 l/min
• 4-inch housing — easy to match the model to the borehole diameter

Application

Used to supply farms and industrial facilities with water from a borehole and to irrigate large areas. The pump is lowered into the borehole and works underwater. Intended for industrial facilities and farms.

Note on use

Keep the pump at least 5 m above the bottom of the borehole with at least 10 m of water above it. Lower the pump on a safety rope, never by the power cable. In a new borehole, leave the pump running for the first 6 hours so that sand and silt are flushed out. Connect the cable with water-resistant wire of the correct cross-section and wrap all joints thoroughly with special insulating tape.

EPA 4EGN10/17-3 — a durable solution for reliable water supply from deep sources.