Deep water pump 6EGN45/4-5,5 (5,5kW)

Borehole Pump EPA 6EGN45/4-5,5 (5.5 kW)

This is a borehole pump designed to lift water from wells and other deep sources. It runs on a 380 V supply with 5.5 kW of power. The pump lifts water up to 53 m and delivers up to 800 litres per minute. The housing diameter is 6 inches.

Advantages

• 5.5 kW power — enough force to lift water steadily from depth
• Up to 53 m head and 800 l/min flow — uninterrupted water supply even from great depth
• Wide operating range — 53 m at 200 l/min, 29 m at 800 l/min
• 6-inch housing — easy to match the model to the borehole diameter

Application

Used to supply farms and industrial facilities with water from a borehole and to irrigate large areas. The pump is lowered into the borehole and works underwater. Intended for industrial facilities and farms.

Note on use

Keep the pump at least 5 m above the bottom of the borehole with at least 10 m of water above it. Lower the pump on a safety rope, never by the power cable. In a new borehole, leave the pump running for the first 6 hours so that sand and silt are flushed out. Connect the cable with water-resistant wire of the correct cross-section and wrap all joints thoroughly with special insulating tape.

EPA 6EGN45/4-5,5 — a durable solution for reliable water supply from deep sources.