Deep water pump 4EGN10/5-0.75 N (0.75kW)

Borehole Pump EPA 4EGN10/5-0.75N (750 W)

This is a borehole pump designed to lift water from wells and other deep sources. It runs on a 220 V supply with 750 W of power. The pump lifts water up to 37 m and delivers up to 230 litres per minute. The housing diameter is 4 inches.

Advantages

• 750 W power — enough force to lift water steadily from depth
• Up to 37 m head and 230 l/min flow — uninterrupted water supply even from great depth
• Wide operating range — 37 m at 60 l/min, 8 m at 230 l/min
• 4-inch housing — easy to match the model to the borehole diameter

Application

Used to supply a house and yard with water from a borehole and to water gardens and vegetable plots. The pump is lowered into the borehole and works underwater. Suits homeowners and farmers.

Note on use

Keep the pump at least 5 m above the bottom of the borehole with at least 10 m of water above it. Lower the pump on a safety rope, never by the power cable. In a new borehole, leave the pump running for the first 6 hours so that sand and silt are flushed out. Connect the cable with water-resistant wire of the correct cross-section and wrap all joints thoroughly with special insulating tape.

EPA 4EGN10/5-0.75N — a durable solution for reliable water supply from deep sources.