Deep water pump 3.5EGN4/13-0,92 (0.92kW)

Borehole Pump EPA 3.5EGN4/13-0,92 (920 W)

This is a borehole pump designed to lift water from wells and other deep sources. It runs on a 220 V supply with 920 W of power. The pump lifts water up to 70 m and delivers up to 90 litres per minute. The housing diameter is 3.5 inches.

Advantages

• 920 W power — enough force to lift water steadily from depth
• Up to 70 m head and 90 l/min flow — uninterrupted water supply even from great depth
• Wide operating range — 70 m at 20 l/min, 29 m at 90 l/min
• 3.5-inch housing — easy to match the model to the borehole diameter

Application

Used to supply a house and yard with water from a borehole and to water gardens and vegetable plots. The pump is lowered into the borehole and works underwater. Suits homeowners and farmers.

Note on use

Keep the pump at least 5 m above the bottom of the borehole with at least 10 m of water above it. Lower the pump on a safety rope, never by the power cable. In a new borehole, leave the pump running for the first 6 hours so that sand and silt are flushed out. Connect the cable with water-resistant wire of the correct cross-section and wrap all joints thoroughly with special insulating tape.

EPA 3.5EGN4/13-0,92 — a durable solution for reliable water supply from deep sources.