Сварочный аппарат инверторный полуавтомат EPA (MIG/MMA+TIG )

Welding machine inverter MIG/MMA+TIG

Article: MIG/MMA+TIG

Mains voltage	220 V
Diameter of the electrode	1.5-4 mm
Output current (TIG)	30-160 A
Wire diameter	0.6-1.0 mm
Output current (MMA)	30-160 A A
Output current (MIG)	30-200 A
Welding mode	MIG/MMA/LIFT TIG
Duty cycle	40%
Warranty	12 months

buy

Inverter Welding Machine EPA MIG/MMA+TIG (200 A)

This is an inverter semi-automatic welder that combines three welding processes — MIG, MMA and TIG (Lift) — in one unit. It runs on a 220 V supply. Welding current adjusts from 30 to 200 A in MIG mode and from 30 to 160 A in MMA and TIG modes. It takes 0.6–1.0 mm wire and 1.5–4.0 mm electrodes.

Advantages

3 processes in one machine — MIG, MMA and TIG welding
IGBT technology — saves energy and gives smooth welding
Digital display — shows current, voltage and wire speed precisely
Polarity change — welding with gas or gasless (flux-core)
Euro connector — fits standard MIG/TIG torches
Wire inch (Cold Feed) button
Overheat protection and fan cooling; IP21S protection

Application

Used for assembling and repairing metal structures, car body work, and making doors, railings and pipe products. TIG (argon) mode suits thin sheet and stainless steel, and gasless (flux) mode is handy for outdoor work. Intended for home users and professional welders.

Note on use

The machine also works without gas, but welding with gas is more effective, so using gas is recommended. Connection: MIG with gas — torch «+», work clamp «−»; MIG gasless (flux) — torch «−», clamp «+». Duty cycle: 40% at 25 °C.

EPA MIG/MMA+TIG — a powerful, reliable machine for strong, high-quality welding of metal structures.